|
Hontai Machinery and equipment (HK) Co. ltd
|
Contact Type High Performance Ignition System Flame Scanner Detector With Self Test Types Of Gas Fue
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Contact Type High Performance Ignition System Flame Scanner Detector With Self Test&nbs
Contact Type High Performance Ignition System Flame Scanner Detector With Self Test Types Of Gas Fuel
Specifications:
|
Sr. |
Name |
Model |
Description |
|
1 |
Falme scanner |
XHT-1 |
Contact type flame detector |
|
2 |
Falme scanner |
XHT-2 |
Micro flame ionization detector |
|
3 |
Falme scanner |
XHT-3 |
UV type, gas and oil flame detection |
|
4 |
Falme scanner |
XHT-4 |
Infrared type |
|
5 |
Falme scanner |
XHT-5 |
Visible light, infrared hybrid, detection of oil, coal and rich in visible light of the gas flame; Also applies to low nitrogen oxide NOx burn |
XHT Flame detection device of power station boiler of large combustion equipment of furnace safety supervisory system and a variety of industrial furnace,the key equipment of burner flame detection.The device according to the physical properties of the combustion flame detection,When the flame burning state does not meet the normal condition or flameout,it will show signal by some mode (Switch quantity and analog quantity),as logic judgment of the fault alarm or furnace safety supervisory system(FSSS).
Technical advantages:
1. Using the latest software and hardware identification technology, with high reliability.
2. With a self-test function, and has higher safety.
3. Adapt to all types of fuel, including gas, fuel, coal and other fuel types.
4. Detection mode, including ion type, light type and image type.
Applications:
XHT Flame detection device is widely used in electric power,Iron and steel, metallurgy, petrochemical and other industries a variety of boiler,burner flame detection, and also can be applied to various occasions the need for flame detection.
1.XHT-1 contact type flame detector
1.)basic configuration:Flame detector 1pcs ,probe 1pcs
The probe also known as ionic conducting rod, consist by the probe, a center electrode, ceramic tube,stainless steel outer sleeve.,usually the diameter is dia18 , dia 16 , Special occasions can be designed according to customer requirements.
2.) Performance parameters:
The fire detecting device consists of a flame probe, cable and signal processing box.
Working principle:Put he probe needle into the flame zone,Use of burning high temperature gasification to produce ionization characteristics,conducting electrode, flame signal, ignition. Then exit probe out flame zone, to avoid the electrode failure bec of high temperature pollution.
Contact type fire detector is only applicable to gas condition
